Front Rail Seal XL 5 1/2ft EPDM Rubber for Truck Cap, Camper Shell 1"W x 1.1"H
Excellent compression set resistance for maximum service life and vibration absorption.
Long-lasting automotive grade EPDM rubber is preferred by professional installers over PVC/foam seals.
No need to replace this seal every time your cap is removed.
Use Front Rail Seal XL to fill an extra large front bulkhead rail gap from .488" to .937" when mounting a truck cap or camper shell. Adheres to the truck's front bulkhead rail. For the cap's side base rails install a high quality Extruded Solutions Truck Cap Seal 20ft (see choices below).
To determine if you need a Front Rail Seal measure the difference in height from the truck's side bed rails (including, if any, bed rail caps) to the truck's front bed rail.
Extruded Solutions Truck Cap Seal choices:
"Super Cap Seal 23ft" or "Super Cap Seal 20ft" (Measures 1 1/2" wide and fills all bed rail gaps. Use on truck caps that weigh 200 lbs or less.
"Premium Cap Seal XL 23ft" or "Premium Cap Seal XL 20ft". Measures 2" wide and fills small to medium bed rail gaps. Use on truck caps that weigh 200 lbs or less.
"Super Cap Seal XL 23ft" or "Super Cap Seal XL 20ft". Measures 2 1/8" and is for trucks with extra wide bed rails, fills all bed rail gaps. Use on caps over 200 lbs.
"Ultra Cap Seal 23ft" or "Ultra Cap Seal 20ft". Measures 1 1/2" wide and fills all bed rail gaps, for caps over 200 lbs.
All truck cap seal kits include seal, butyl tape, alcohol pads and detailed instructions for a professional installation.
IMPORTANT: To completely seal out dust and water install patented Ultimate Tailgate Seal with Taper Seal® to the tailgate gap and sidewalls
MADE IN USA