Super Cap Seal 23ft & 4 Silver G-1 Clamps for mounting Truck Cap, Shell up to 200 lbs.
One 23ft "Super Cap Seal" for mounting a truck cap or camper shell that weighs 200 lbs or less and a set of 4 G-1 clamps for short bed.
Long-lasting automotive grade EPDM rubber seal and 4 clamps made with 6000 series structural aluminum to ensure quality and strength.
G-1 clamps fit: CHEVY: Silverado / Sierra 1500, 2500, 3500. Silverado / Sierra '07 with Cargo Rail. DODGE: Dakota. Ram 1500, 2500, 3500. FORD: F150. MITSUBISHI: Raider. NISSAN: Titan. TOYOTA: Tundra. GCI clamps are "Stronger by Design." A: 0 to 1 1/2” Jaw Opening B: 1 7/8” C: 1 1/8”
Super moisture barrier double bulb seal prevents dust, fumes and water from invading the interior of a truck bed. Easily trims in half to fit trucks with smaller width front bed rails. NOTE: To determine if you need to use a Front Rail Seal 6ft measure the difference in height from the truck's side bed rails (including, if any, bed rail caps) to the truck's front bed rail. If the height of the gap is .250" or less install Super Cap Seal only. If the height of the gap is from .251" to .487" install Front Rail Seal on the cap's front base rail and install Super Cap Seal on the cap's side base rails. If the height of the gap is extra large, from .488" to .875" install Super Cap Seal on the cap's front and side base rails and install Front Rail Seal on the truck's front bed rail. OTHER QUALITY TRUCK CAP SEALS FROM EXTRUDED SOLUTIONS: 1 1/2" wide Ultra Cap Seal 23ft fills all bed rail gaps, for caps over 200 lbs. IMPORTANT: To completely seal out dust and water install an Ultimate Tailgate Seal with Taper Seal® to the tailgate gap and sidewalls.
MADE IN USA